Siemens Simatic ET200pro Operating Instructions Manual Download Page 308

Page: 308 / 545

Interface modules

12.2 Interface modules for PROFINET IO

ET 200pro distributed I/O system

308

Operating Instructions, 03/2013, A5E00335544-08

Media redundancy

Function for ensuring the network and system availability. Redundant transmission links (ring

topology) ensure that an alternative communication path is made available if a transmission

link fails.
For additional information, refer to the STEP 7 online help and the PROFINET System

Description (

http://support.automation.siemens.com/WW/view/en/19292127

) Manual.

Note
Media redundancy is only possible if the IM 154-4 PN High Feature interface module with

firmware version 7.0.0 is used. The labeling on the connection module may differ if other

product versions are used.

Shared device

IO device which makes its data available to multiple IO controllers.

Note
Please note that the power and electronics modules in a potential group have to be assigned

to the same IO controller so that a load voltage failure can be diagnosed.

For additional information, refer to the STEP 7 online help and the PROFINET System

Description (

http://support.automation.siemens.com/WW/view/en/19292127

) Manual.

Spare part replacement for IM 154-4 PN High Feature

If a spare part replacement is necessary, an IO device in operation must be reset to the

factory settings by using "Reset to factory settings".

Summary of Contents for Simatic ET200pro


































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands

Siemens Simatic ET200pro, Operating Instructions Manual

Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands