Siemens Simatic ET200pro Operating Instructions Manual Download Page 96

Page: 96 / 545

Connection

4.8 Connecting the IM 154-4 PN High Feature interface module with CM IM PN M12, 7/8"

ET 200pro distributed I/O system

Operating Instructions, 03/2013, A5E00335544-08

CAUTION

PROFINET
Modules with PROFINET interfaces may only be operated in LANs (Local Area Networks)

in which all connected devices are equipped with SELV/PELV power supplies (or have

equivalent protection).
A data transfer terminal (modem, for example) that guarantees this level of safety must be

used for the interface to the WAN (Wide Area Network).

Requirements

The IM 154-4 High Feature interface module (including the bus module) and the

CM IM PN M12, 7/8" connection module have been installed on the rack.

Required tools

●

Screwdriver

●

Stripping tool for wiring the M12 and 7/8" cable connectors, if you are fabricating your

own cables.

Required accessories

●

Preassembled cables with M12 and 7/8" cable connectors. The cables are available in

different lengths.

●

If you are fabricating your own cables:
–

M12: 4-core, shielded bus cable, and d-coded M12 cable connector (PROFINET)

–

7/8": 5-core cable and 7/8" cable connector

Summary of Contents for Simatic ET200pro


































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands

Siemens Simatic ET200pro, Operating Instructions Manual

Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands