Siemens Simatic ET200pro Operating Instructions Manual Download Page 170

Page: 170 / 545

Maintenance and service

7.7 Updating the interface module firmware

ET 200pro distributed I/O system

170

Operating Instructions, 03/2013, A5E00335544-08

7.7.3

Updating the firmware online (via networks)

Introduction

To update the firmware of the IM 154-4 PN High Feature (6ES7154-4AB10-0AB0), you

require files (*.UPD) containing the latest FW version.

Note
The online update of firmware pertains only to the IM 154-4 PN High Feature interface

module. When an online firmware update is performed, other modules in the station assume

the configured substitute value behavior or become de-energized.

Requirements

●

Online firmware updates can be performed in

STEP 7

V5.4 + SP2 or higher.

●

The interface module of the station to be updated must be accessible online.

●

The files containing the current firmware versions must be available in the file system of

your programming device or PC. A folder may contain only the files of one firmware

version.

Performing a firmware update

Run

STEP 7

and switch to HW Config.

Open the station containing the IM 154-4 PN High Feature you want to update.

Select the IM 154-4 PN High Feature.

Select the menu command PLC > Update Firmware.

In the Update Firmware dialog, select the path to the firmware update files (*.UPD) using

the Browse button.

After you selected a file, the information in the lower fields of the Update Firmware dialog

box shows you the suitable module and firmware version for the file.

Click the Run button.

STEP 7

checks whether the selected file can be interpreted by the

IM 154-4 PN High Feature and, if so, downloads the file to the interface module. If this

requires changing the operating state of the IM 154-4 PN High Feature, you will be asked

to perform these actions in the relevant dialog boxes. The IM 154-4 PN High Feature then

automatically updates the firmware.

Use

STEP 7

(Read CPU diagnostics buffer) to check whether the IM 154-4 PN High

Feature starts up with the new firmware. You can read out the current firmware version in

the module status of the IM 154-4 PN High Feature.

Summary of Contents for Simatic ET200pro


































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands

Siemens Simatic ET200pro, Operating Instructions Manual

Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands