Siemens Simatic ET200pro Operating Instructions Manual Download Page 23

Page: 23 / 545

Description

1.5 Components of the ET 200pro distributed IO system

ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08

1.5

Components of the ET 200pro distributed IO system

Components of the ET 200pro distributed I/O system

The table below lists the most important components of ET 200pro (Page 478).

Table 1- 1

Components of ET 200pro

Component

Function

View

Rack

The ET 200pro is mounted onto the

rack.
4 versions with different lengths are

available:

•

Rack, narrow

①

•

Rack, wide

②

•

Rack, compact-narrow

③

•

Rack, compact-wide

④

Interface

module for

PROFIBUS DP

with bus

module and

terminating

module

The interface module interconnects

ET 200pro with the DP master and

prepares the data for the electronic

modules.
The unit is delivered with the
terminating module

②

, and the

interface module

①

is already

mounted on the bus module.

•

The bus module is the mechanical

and electrical connection element

between the various ET 200pro

modules.

•

The terminating module

terminates the ET 200pro.

The following interface modules are

available for PROFIBUS DP:

•

IM 154-1 DP

•

IM 154-2 DP High Feature

Summary of Contents for Simatic ET200pro


































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands

Siemens Simatic ET200pro, Operating Instructions Manual

Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands