Connection
4.8 Connecting the IM 154-4 PN High Feature interface module with CM IM PN M12, 7/8"
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
95
See also
Mounting the Interface Module (Page 53)
4.8
Connecting the IM 154-4 PN High Feature interface module with
CM IM PN M12, 7/8"
Introduction
You connect the power supplies and PROFINET IO to the CM IM PN DP M12, 7/8"
connection module. The IM 154-4 High Feature interface module is equipped with an internal
PROFINET switch. This allows the direct forwarding of PROFINET or the direct connection
of an additional IO device (e.g., ET 200pro with IM 154-8 CPU).
X02 P1 R
M12 circular socket connector (with female contact insert) for connection of
PROFINET IO
X02 P2 R
M12 circular socket connector (with female contact insert) for connection of
PROFINET IO
X03 DC 24V 7/8" circular socket connector (with male contact insert) for feeding the 1L+
electronics/
encoder supply and 2L+ load voltage supply
X04 DC 24V 7/8" circular socket connector (with female contact insert), for looping the 1L+
electronics/
encoder supply and 2L+ load voltage supply
Figure 4-13 CM IM PN M12, 7/8" connection module
