Siemens Simatic ET200pro Operating Instructions Manual Download Page 53

Page: 53 / 545

Mounting

3.3 Mounting the Interface Module

ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08

3.3

Mounting the Interface Module

Introduction

The interface module interconnects ET 200pro with PROFIBUS DP/ PROFINET IO and

supplies power to the electronic modules.

Requirements

●

Interface modules for PROFIBUS DP
–

The terminating module is removed from the interface module.

–

The rack has been mounted.

●

Interface module for PROFINET IO
–

The terminating module is removed from the interface module.

–

The rack has been mounted.

Required tools

Cross-tip screwdriver, size 2

Summary of Contents for Simatic ET200pro


































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simatic ET200pro

Reviews:

Siemens Simatic ET200pro, Operating Instructions Manual, Page: 53 / 545

Search results

Summary of Contents for Simatic ET200pro

Reviews: