Siemens Simatic ET200pro Operating Instructions Manual Download Page 180

Page: 180 / 545

Functions

8.1 PROFIBUS DP

ET 200pro distributed I/O system

180

Operating Instructions, 03/2013, A5E00335544-08

Special notes on option handling

Note the following:

●

If a data record request is issued to an option slot that is not present, this is answered

with a fault (80B2).

●

If the IM154-1/2 is operated without configuration or without a CPU (DP master), it

supplies the configuration as it exists. This is relevant for the tools for the wiring test,

since the actual slot numbers, without gaps from 1 to n, are used there for status/control.

●

There are no limitations when digital modules are packed. Theoretically, the module to

which the byte address is assigned in the preset configuration can be missing in the

structure.

Note
The configured slot numbers (slot numbers in data records and for events such as

diagnostics and interrupts) always apply to slot addressing.

Additional information regarding option handling

For additional information regarding option handling (application example), refer to Service &

Support page on the Internet

(

http://support.automation.siemens.com/WW/view/en/29430270

Summary of Contents for Simatic ET200pro


































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands

Siemens Simatic ET200pro, Operating Instructions Manual

Search results

Summary of Contents for Simatic ET200pro

Reviews:

Related manuals for Simatic ET200pro

Brands by name

Popular brands