80
Trigger Inputs and Output Format
Section 4-3
One Shot Reading (@GL) 1:N Connection
Uses a trigger to read from the V530-R150 with the specified unit
number. Reading ends when the reading is correctly performed (OK).
When the reading is not correctly performed (NG), reading continues
to be performed for the number of retries specified in the setting con-
ditions.
The reading data will not be output until the Polling Instruction (@RD
Command) is sent.
Send
Set the unit number (00 to 31) of the desired V530-150.
Receive
Refer to the explanation of the output format.
page 82
Polling (@RD) 1:N Connection
Outputs the reading data of the V530-R150 with the specified unit
number.
Send
Set the unit number (00 to 31) of the desired V530-150.
Receive
Refer to the explanation of the output format.
page 82
QR Code Teaching (@MQ) 1:N Connection
Performs teaching in QR Code (normal) mode. If the reading judge-
ment is OK, the optimum settings will be registered automatically. If
the reading judgement is NG, the settings will not be updated.
Send
Set the unit number (00 to 31) of the desired V530-150.
Set the symbol color to either B or W. (B specifies black and W spec-
ifies white.)
Receive
Refer to the explanation of the output format.
page 82
@ G
<Footer>
L
<Unit number>
@ R
<Footer>
D
<Unit number>
@ M
<Footer>
Q
<Symbol color>
<Unit number>
Summary of Contents for V530-R150E-3 -
