81
Trigger Inputs and Output Format
Section 4-3
Data Matrix Teaching (@MD) 1:N Connection
Performs teaching in Data Matrix (normal) mode. If the reading judge-
ment is OK, the optimum settings will be registered automatically. If
the reading judgement is NG, the settings will not be updated. Auto-
matically discriminates between EC200 and EC000 to EC140 based
on the matrix size.
Send
Set the unit number (00 to 31) of the desired V530-150.
Set the matrix size in 2 or 4 digits. Use two digits when the matrix is
square, i.e., “@TD 10” if the matrix is 10
10. Use four digits when the
matrix is rectangular, i.e., “@TD 1648” if the matrix is 16
48. Refer to
Appendix C for tables listing the matrix sizes.
Receive
Refer to the explanation of the output format.
page 82
Read Scene Number (@MS) 1:N Connection
Outputs the scene number (0 to 9) of the scene being displayed.
Send
Set the unit number (00 to 31) of the desired V530-150.
Receive
The data is output from the V530-150 without using the Polling Com-
mand.
Change Scene Number (@MS) 1:N Connection
Changes the scene being displayed.
Send
Set the unit number (00 to 31) of the desired V530-150.
Set the desired scene number (0 to 9).
Receive
The data is output from the V530-150 without using the Polling Com-
mand.
“OK” indicates that the command was executed correctly:
@ M
<Footer>
D
<Matrix size>
<Unit number>
@ M
<Footer>
S
<Unit number>
<Header>
<Footer>
<Scene number>
<Unit number>
@ M S
<Footer>
<Scene number>
<Unit number>
O K <Footer>
<Header>
Summary of Contents for V530-R150E-3 -
