Omron V530-R150E-3 -, Operation Manual

Page: 86 / 300

69
Trigger Inputs and Output Format
Section 4-3
11 Host Link Read source data
area 0: IR/CIO, 1: HR, 2: LR, 3: DM, 4: None
12 Start address 0000 to 9995 (See note 2.)
13 Write destination data
area 0: IR/CIO, 1: HR, 2: LR, 3: DM, 4: None
14 Start address 0000 to 9996 (See note 2.)
15 PLC mode check 0: ON, 1: OFF
16 Terminal block Trigger mode 0: Continuous, 1: Level trigger
17 Output polarity 0: ON for NG, 1: ON for OK
18 Output period 000020 to 100000 in 100-
m
s units
(See note 3.)
19 Gate ON delay 00010 to 10000 in 100-
m
s units
(See note 4.)
20 Gate ON time 00010 to 10000 in 100-
m
s units
(See note 4.)
21 Output settings Attach number of dig-
its
0: OFF, 1: ON
22 Attach center coordi-
nates 0: OFF, 1: ON
23 Attach rotational
angle 0: OFF, 1: ON
24 Polling 0: OFF, 1: ON
25 Data region specifica-
tion function 0: OFF, 1: ON
26 Start position 001 to 999 (See note 1.)
27 End position 001 to 999 (Must be greater than the start
position. See note 1.)
28 Image storage
method Image storage 0: None, 1: Only NG, 2: All
29 Startup mode Start scene 0 to 9
30 Start mode 0: SET, 1: MON, 2: RUN
31 Error method BUSY input 0: OFF, 1: ERR ON
32 Device settings Two-camera Unit 0: Out of use, 1: F150-A20
33 Camera 0 Intelligent
Light Source 0: Out of use, 1: F150-SLC20,
2: F150-SLC50
34 Camera 1 Intelligent
Light Source 0: Out of use, 1: F150-SLC20,
2: F150-SLC50
Number System data