Omron V530-R150E-3 -, Operation Manual

Page: 96 / 300

79
Trigger Inputs and Output Format
Section 4-3
Write Light Level Settings (@LW) 1:1 Connection
Changes the light level settings for the specified Camera’s Intelligent
Light.
Send The command format depends on the Intelligent Light Source that is
being used. There are 5 settings in the F150-SLC20 Intelligent Light
Source and 8 settings in the F150-SLC50 Intelligent Light Source.
F150-SLC20 Specified
Set the camera no. to 0 or 1 and set the light level for each area. The
light level settings for areas A to E can range from 0 to 7; a value of 0
is OFF and 7 is the maximum brightness.
F150-SLC50 Specified
Set the camera no. to 0 or 1 and set the light level for each area. The
light level settings for areas A to H can range from 0 to 7; a value of 0
is OFF and 7 is the maximum brightness.
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
@ L W <Camera no.> (C) (D) <Footer> (E) (A) (B)
Viewed from this
this direction
@ L W <Camera no.> (C) (D) <Footer> (E) (A) (B) (F) (G) (H)
Viewed from this
this direction
O K <Footer> <Header>
E R <Footer> <Header>