253
Error Codes and Countermeasures
Section 9-2
9-2
Error Codes and Countermeasures
9-2-1
Data Matrix Reading (Normal or Pattern Mode)
Error Code
Description
Countermeasures
E100
Finder pattern detec-
tion error (No candi-
date finder patterns)
No finder patterns were detected.
• Make sure that the image is displayed on the monitor
correctly.
• Check the printing of the reading code. The L-shaped
finder pattern may be stained or damaged.
E110
Finder pattern detec-
tion error (No finder
patterns were
detected.)
No finder patterns were detected.
• Make sure that the image is displayed on the monitor
correctly.
• Check the printing of the reading code. The L-shaped
finder pattern may be stained or damaged.
E111
Finder pattern detec-
tion error (Only one
part of the finder pat-
tern was detected.)
Only one line of finder patterns was detected.
• Make sure the image is displayed on the monitor cor-
rectly. Check the printing of the reading code.
• One of the L-shaped finder patterns may be stained or
damaged.
The position of finder patterns can be confirmed on the
monitor when Display Settings/Finder Pattern is turned
ON.
E112
Finder pattern detec-
tion error (The relative
positioning is incor-
rect.)
Finder patterns (two lines) were detected.
However, the relative positioning of the patterns is incor-
rect.
• The codes may be bent or part of the finder patterns
may be stained or damaged.
• The L length (the length of finder patterns) set may be
too long.
Parameters can be set automatically using the teaching
function.
E120
Decode error (Timing
pattern detection error)
Check the printing of the reading codes.
• The timing patterns in the X or Y directions may be
stained or damaged.
• The matrix size may not be set correctly.
• The L length (the length of finder patterns) set may be
too short.
Parameters can be set automatically using the teaching
function.
E121
Decode error (Timing
pattern detection error
in X direction)
Check the printing of the reading code.
• The timing pattern in the X direction may be stained or
damaged.
• Codes may be bent.
E122
Decode error (Timing
pattern detection error
in Y direction)
Check the printing of the reading code.
• The timing pattern in the Y direction may be stained or
damaged.
• Codes may be bent.
Summary of Contents for V530-R150E-3 -
