Omron V530-R150E-3 -, Operation Manual

Page: 223 / 300

206
System
Section 6-4
Note Refer to the manual of the converter for the number of V530-
R150 that can be connected.
The number is different depending on the converter.
1,2,3...
1. Select whether or not multi-drop connections are being used.
Note When this function is turned ON, the flow control in SYS/
Communications/Normal is automatically set to Multi
drop.
2. Set the Unit No. (0 to 31; Default setting: 0)
Procedure
1,2,3...
1. Select Multi drop.
OFF
(Default setting) Multi-drop connections are not being used.
ON Multi-drop connections are being used.
When this setting is ON, results are not output
through RS-232C even if read processing is per-
formed. The results will be output when a Send Data
Instruction (Polling Command) is sent from the host.