68
Trigger Inputs and Output Format
Section 4-3
Read Version Information (@VR) 1:1 Connection
Reads the system’s version information.
Send
Receive
The version information is returned if the command was executed
correctly:
Example version information:
V530-R150 Ver3.00 2001/04/01 12:00
Read System Data (@SR) 1:1 Connection
Reads the specified system data.
Send
Set the parameter number (1 to 34) to read the corresponding system
data.
Receive
The system data is returned if the command was executed correctly:
The following table shows the data that is read for each parameter
number.
@ V R <Footer>
<Version>
<Footer>
<Header>
<FCS>
@ S
<Footer>
R
<Parameter number>
<System data>
<Footer>
<Header>
<FCS>
Number
System data
1
RS-232C
Baud rate
0: 2,400, 1: 4,800, 2: 9,600, 3: 19,200,
4: 38,400 (bps)
2
Data length
0: 7 bits, 1: 8 bits
3
Parity
0: None, 1: Odd, 2: Even
4
Stop bits
0: 1 bit, 1: 2 bits
5
Header
0: None, 1: STX, 2: ESC
6
Footer
0: CR, 1: LF, 2: CR+LF, 3: ETX
7
FCS
0: OFF, 1: ON
8
Mode
0: Normal, 1: Host Link, 2: 3964, 3: 3964R
9
Normal
(No-protocol)
Flow control
0: None, 1: RS/CS, 2: Xon/Xoff
10
Timeout
001 to 120 s (See note 1.)
Summary of Contents for V530-R150E-3 -
