Omron V530-R150E-3 -, Operation Manual

Page: 84 / 300

67
Trigger Inputs and Output Format
Section 4-3
Change Mode (@MC) 1:1 Connection
Changes the mode to Monitor mode or Run mode.
Send
Set the mode to 0 to specify Monitor mode or 1 to specify Run mode.
Monitor mode: 0
Run mode:
1
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
Change Camera Mode (@CC) 1:1 Connection
Changes the camera mode when a Two-camera Unit is being used.
Send
Set the camera mode to 0 to specify Camera 0, 1 to specify Camera
1, or 2 to specify two-camera switching.
“
page 121
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
@ M <Footer> C <Mode>
O K <Footer> <Header>
E R <Footer> <Header>
Mode Camera mode setting
Camera 0 0
Camera 1 1
Two-camera switching 2
@ C <Footer> C <Camera mode>
O K <Footer> <Header>
E R <Footer> <Header>