Omron V530-R150E-3 -, Operation Manual

Page: 145 / 300

128
SET (Setting) Mode
Section 6-1
If this setting is turned ON, the filtering process selected with Image
Adjust/Filtering will be performed twice. The time required for filter-
ing will increase by approximately 33 ms, but when reading codes
made up of dots, reading can be performed with greater stability by
performing smoothing twice.
Note This setting has no effect If filtering has been disabled by select-
ing “OFF” for the Image Adjust/Filtering setting.
“
page 127
Procedure
1,2,3...
1. Select 0. Image Adjust.
2. Select Filtering Retry.
0. Image Adjust
Filtering Retry
Example: Image obtained when smoothing is performed twice.