Omron V530-R150E-3 -, Operation Manual

Page: 274 / 300

257
Error Codes and Countermeasures
Section 9-2
9-2-3 QR Code Reading (Normal or Pattern Mode)
Error Code Description Countermeasures
E000 No finder patterns
detected No finder patterns were detected.
• Make sure that the image is displayed on the monitor
correctly.
• Check the printing of the reading code. Three finder
patterns in corners may be stained or damaged.
E001 Finder pattern detec-
tion error (Two pat-
terns were not
detected.) Only one finder pattern was detected. (The other two pat-
terns were not detected.)
• Check the printing of the reading code. Two finder pat-
terns may be stained or damaged.
• The position of finder patterns can be confirmed on the
monitor when Display Settings/Finder Pattern is
turned ON.
E002 Finder pattern detec-
tion error (One pattern
was not detected.) Only two finder patterns were detected. (One pattern was
not detected.)
• One finder pattern may be stained or damaged.
• The position of finder patterns can be confirmed on the
monitor when Display Settings/Finder Pattern is
turned ON.
E003 Finder pattern detec-
tion error (The relative
positioning is incor-
rect.) Three finder patterns were detected. However, the rela-
tive positioning of the three finder patterns is incorrect.
• The code may be bent or part of the finder patterns
may be stained or damaged.
• The position of finder patterns can be confirmed on the
monitor when Display Settings/Finder Pattern is
turned ON.
E004 Finder pattern detec-
tion error (4 or more
finder patterns were
detected.) Too many finder patterns (4 or more) were detected.
• Some of the finder patterns may be stained or dam-
aged.
• The position of finder patterns can be confirmed on the
monitor when Display Settings/Finder Pattern is
turned ON.
E010 Decode error
(Tentative version cal-
culation error) Finder patterns may be bent. Make sure that the image is
loaded and at least 5 pixels per cell are displayed.
• The number of pixels of any section on a monitor can
be checked under 2. Image Analysis/Measure
Length.
E011 Decode error (Format
information error) “Format information” in QR Codes may be stained or
damaged. (Refer to the figure below.)
E012 Decode error “Version information” in QR Codes is not correct.
E013 Decode error
(Cell recognition error) Codes were restored to correct errors, but not decoded
correctly.
Data of QR Codes may be stained or damaged.
E020 Decode error
(No definition error) The printing is in a special format and not defined for the
V530-R150 (connection mode, etc.).
Change the printing format.