Omron V530-R150E-3 -, Operation Manual

Page: 109 / 300

92
Connection Examples
Section 4-5
Communication Settings
• V530-R150 Settings
“
page 194 and page 196
• Programmable Controller Settings
Program Examples
This program inputs a One Shot Reading Command to the Program-
mable Controller’s DM. The V530-R150 references this command
and reads the data. The reading data is written to the specified words
in the Programmable Controller.
1,2,3...
1. Set the reading conditions of the V530-R150 and set the reading
mode to RUN mode.
2. Set the Start Reading Command in DM0100 of the Programma-
ble Controller.
“
The V530-R150 reads codes, sets the Write Flags in DM0110,
and writes the reading data to DM words beginning with DM0111.
Item Setting
Communication setting Baud rate The same settings as
those of the Program-
mable Controller.
Data length
Parity bits
Stop bits
Mode Host link
Host Link setting Read area DM
Begin read word 0100
Write area DM
Begin write word 0110
Item Setting
Communications mode SYSWAY (Host Link)
1 : 1 / 1: N 1 : N
Unit No. 00
Baud rate Match the settings with a V530-R150
Data length
Parity bits
Stop bits