Omron V530-R150E-3 -, Operation Manual

Page: 69 / 300

52
Communication Settings
Section 4-2
TRIG A Signal as Reading Trigger
A timeout error occurs if there is no response from the host computer
within the set time when RS/CS or Xon/off is selected for flow control
and it is assumed that the line is broken or the computer is not work-
ing correctly. An error message appears on the screen, and the ERR
(error) terminal turns ON.
Program example
“
page 90
4-2-2 Host Link
Select Host Link for the communications mode to communicate in
Host Link format with a Programmable Controller or other host device
via the RS-232C port.
Communications method setting menu
“
page 194
Perform reading
The BUSY terminal turns ON while readings are being
performed.
Output judgment
Gate ON time varies according to data
volume and baud rate.
Receive judgment
V530-R150
Unit number: 00 (fixed)
Programmable Controller