Omron V530-R150E-3 -, Operation Manual

Page: 125 / 300

108
STEP 2 Setting Reading Conditions
Section 5-3
12 Press the TRIG Key on the Console to perform one reading.
Parameters are set based on the data obtained with this
reading.
Note The parameters are registered based on the first data that is
read. If reading is performed successfully, the teaching function
will automatically turn OFF. To repeat the teaching operation, go
back to SET mode and repeat the procedure from step 7.
The parameters can be displayed and changed if necessary
from Reading Settings (Manual).
“
page 139
If the results of the read is NG, the teaching function will re-
main ON. To turn it OFF, go to the screen shown in step 8,
select Reading Settings (Manual), and press the ENT Key.
The teaching function will turn OFF when the screen for man-
ual reading of settings is entered.
13 This completes the settings.
QR Code Reading
Select the required shutter speed and symbol color. The other read-
ing conditions can be set using the teaching function. Using the
teaching function, a reading is performed on the reading object and,
based on this, parameters are set automatically.
The obtained parameters are displayed. These
parameters are registered as reading conditions.
In RUN mode, only the read data (ABCDE12345
in this example) is output to RS-232C.