143
SET (Setting) Mode
Section 6-1
Specifies whether or not to display the Cell Position on the
screen.
Note When the Function Settings/Cell Verify setting is set to
Verify, that setting takes precedence and this Cell Verify
position setting is invalid.
Specifies the font size that will be used when reading data is dis-
played on the screen.
Note Data other than the reading data (such as the detail data)
are not affected by this setting and will always be displayed
in the standard font size.
Specifies the type of image that will be displayed on the screen.
ON
(default)
A cross cursor will be displayed at the position identified as
the cell.
OFF
Do not display the cell’s position.
1
(default)
The data will be displayed in the standard font size.
4
The data will be displayed in a font size that is 4
larger
than the standard size, unless there are more than 64 char-
acters. If there are more than 64 characters, the data will be
displayed in the standard font size even if this setting is set
to
4. (The Read Accuracy and Data History information will
be displayed in
4 font size if they are being displayed.)
Normal
(default)
Displays the image read from the camera.
Binary
Displays a binary image with the threshold value used for
decoding as the threshold value. This display can be used
to check which white parts and black parts of the code that
the V530-R150 identified in the image read from the Cam-
era.
Summary of Contents for V530-R150E-3 -
