Omron V530-R150E-3 -, Operation Manual

Page: 99 / 300

82
Trigger Inputs and Output Format
Section 4-3
“ER” indicates that the command was not executed correctly:
Output Format of Reading data
The following diagrams show the output format used when outputting
reading data. There is a setting in the communications specifications
setting menu that selects whether or not the Polling Command will be
used to control output timing.
“
page 199
Output Formats for a 1:1 Connection
• Reading OK
The data items in the dashed-lines can be included or omitted from
the output format with settings in the communications specifications
setting menu.
“
page 199
• Read Accuracy ON
• Judge Coincidence Function ON
• Reading NG
Output Formats for 1:N Connections
The output formats for 1:N connections are identical to those for 1:1
connections except that the unit number (00 to 31) is included after
the header.
E R <Footer> <Header>
<No. of digits> <Coordinates> <Angle> <FCS> <Footer> <Header> <Read data>
<Read Accuracy> <FCS> <Footer> <Header> : <Read data> %
Indicates the results (Read Accuracy) of 10 reads.
The reading data will contain a "?" if the Read
Accuracy is 0%.
<Number> <FCS> <Footer> <Header> <Read data>
00: Matches registered Data 0.
01: Matches registered Data 1.
02: Matches registered Data 2.
03: Matches registered Data 3.
NG:
Does not match any registered data.
<FCS> <Footer> <Header> ? <Error code>
<Coordinates> <Angle> <FCS> <No. of digits> <Footer> <Header> <Unit number> <Read data>