Omron V530-R150E-3 -, Operation Manual

Page: 177 / 300

160
SET (Setting) Mode
Section 6-1
6. Press the TRIG Key on the Console to perform one reading.
Note Parameters will be registered based on the results of the first
reading. If the reading is performed correctly, the teaching func-
tion will automatically turn OFF. To redo the settings, go to SET
mode and repeat the procedure from step 1.
It is possible to view and, if necessary, change the parameter set-
ting in Reading Settings (Manual).
“
page 161
If reading is not performed correctly (NG), the teaching function
will stay ON. To turn the teaching function OFF, select Reading
Settings (Manual) from the screen shown in step 2, and press
the ENT Key. The teaching function will be turned OFF by enter-
ing the Reading Settings (Manual) window.
The parameters obtained are displayed.
These parameters are used as settings.
In RUN mode, only the read data (ABCDE12345
in this example) is output to RS-232C.