Omron V530-R150E-3 -, Operation Manual

Page: 95 / 300

78
Trigger Inputs and Output Format
Section 4-3
Read Light Level Settings (@LR) 1:1 Connection
Reads the light levels set for the specified Camera’s Intelligent Light
Source.
Send
Set the camera number to 0 or 1.
Receive If the command was executed correctly, the light level settings will be
returned. There are 5 settings in the F150-SLC20 Intelligent Light
Source and 8 settings in the F150-SLC50 Intelligent Light Source.
F150-SLC20 Specified
The light level settings for areas A to E can range from 0 to 7; a value
of 0 is OFF and 7 is the maximum brightness.
F150-SLC50 Specified
The light level settings for areas A to H can range from 0 to 7; a value
of 0 is OFF and 7 is the maximum brightness.
Command Execution Incorrect
“ER” indicates that the command was not executed correctly:
@ L <Footer> R <Camera number>
<Header> (A) (B) (C) (D) <Footer> <FCS> (E)
Viewed from this
this direction
<Header> (A) (B) (C) (D) <Footer> <FCS> (E) (F) (G) (H)
Viewed from this
this direction
E R <Footer> <Header>