Omron V530-R150E-3 -, Operation Manual

Page: 80 / 300

63
Trigger Inputs and Output Format
Section 4-3
Load Image Data (@BL) 1:1 Connection
Loads the image data. The data transfer is performed with XMODEM
(–CRC or SUM) protocol. (The XMODEM (–1K) protocol is not sup-
ported.)
The V530-R150 sends the character string “READY” to the external
device when the V530-R150 has completed its initialization. Wait for
the “READY” string to be received at the external device before start-
ing the data transfer.
Send
The two-digit memory number specifies the destination for the image
data being loaded. For example, the command “@BL 03” specifies
memory number 3.
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
Save Image Data (@BS) 1:1 Connection
Saves the image data. The data transfer is performed with XMODEM
(–CRC or SUM) protocol. (The XMODEM (–1K) protocol is not sup-
ported.)
Send
The two-digit memory number specifies the memory location contain-
ing the image data to be saved. For example, the command “@BS
03” specifies memory number 3.
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
@ B <Footer> L <Memory number>
O K <Footer> <Header>
E R <Footer> <Header>
@ B <Footer> S <Memory number>
O K <Footer> <Header>
E R <Footer> <Header>