Omron V530-R150E-3 -, Operation Manual

Page: 215 / 300

198
System
Section 6-4
3. This parameter defines the maximum number of attempts the
product is allowed in order to establish a connection.
Select 1 to 255.
(Default setting: 6)
4. This parameter defines the maximum number of attempts permit-
ted to transfer a message frame (including the first one) in the
event of an error.
Select 1 to 255.
(Default setting: 6)
5. With the 3964(R) procedure, one communications partner must
be assigned a higher priority and the other partner, a lower prior-
ity.
The master has a higher priority.
The slave has a lower priority.
Select Master or Slave.
(Default setting: Slave)
Note
1. In the 3964R mode, “@GC” and “@SC” commands cannot use.
“@GC”: Start continuous reading
“@SC”: Stop continuous reading
2. In the 3964R mode, TRIG_B (Continuous Trigger mode) cannot
be used.
Terminal Block