Omron V530-R150E-3 -, Operation Manual

Page: 78 / 300

61
Trigger Inputs and Output Format
Section 4-3
Set the matrix size in 2 or 4 digits. Use two digits when the matrix is
square, i.e., “@TD 10” if the matrix is 10
™
10. Use four digits when the
matrix is rectangular, i.e., “@TD 1648” if the matrix is 16
™
48. Refer to
Appendix C for tables listing the matrix sizes.
Receive Refer to the explanation of the output format.
“
page 82
Note The timeout time is fixed at 10 s when teaching. A timeout error
will be output if the reading judgement is NG. In this case, check
the code conditions and execute the @TD command again.
Load Scene Data (@CL) 1:1 Connection
Loads the scene data. The data transfer is performed with XMODEM
(–CRC or SUM) protocol. (The XMODEM (–1K) protocol is not sup-
ported.)
The V530-R150 sends the character string “READY” to the external
device when the V530-R150 has completed its initialization. Wait for
the “READY” string to be received at the external device before start-
ing the data transfer.
Send
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
Save Scene Data (@CS) 1:1 Connection
Saves the scene data. The data transfer is performed with XMODEM
(–CRC or SUM) protocol. (The XMODEM (–1K) protocol is not sup-
ported.)
Send
Receive “OK” indicates that the command was executed correctly:
@ C L <Footer>
O K <Footer> <Header>
E R <Footer> <Header>
@ C S <Footer>
O K <Footer> <Header>