214
Computer Data Backup (Tool Menu)
Section 6-5
Data may be lost, and the V530-R150 may not operate properly
the next time it is started.
Saving Data to a Personal Computer (V530-R150
Personal Computer)
Procedure
1,2,3...
1.
Connect the COM1 port on the computer and the V530-R150 us-
ing an RS-232 cable.
2.
Make the V530-R150 communication settings.
The default communication settings are as shown in the following
table. These settings can be normally used.
3.
Start the Hyper Terminal program on the computer and make the
following communication settings.
The same communication settings must be used on both the
V530-R150 and the modem on the computer.
Item
Setting
Baud rate
38400 bps
Data length
8 bits
Parity bits
None
Stop bits
1 bit
Footer
CR
Item
Setting
Baud rate (B)
38400 bps
Data length (D)
8 bits
Parity bits
None
Stop bits
1 bit
Flow control
None
(XMODEM protocol is used, so flow control
is not performed.)
Summary of Contents for V530-R150E-3 -
