Omron V530-R150E-3 -, Operation Manual

Page: 227 / 300

210
System
Section 6-4
6-4-7 Device Settings
Change the Device Settings with this menu when a Two-camera Unit
or Intelligent Light Source is connected.
1,2,3...
1. Specify whether or not a Two-camera Unit is being used.
2. 3.Specify whether or not an Intelligent Light Source is being used
on Camera 0 or Camera 1.
Note The Intelligent Light Source has a DIP switch that is used to set
its unit number. Set the unit number to 0 if the Light Source is
attached to Camera 0; set the unit number to 1 if the Light Source
is attached to Camera 1.
Out of use
(Default setting) A Two-camera Unit is not being used.
F150-A20 An F150-A20 Two-camera Unit is being used.
Out of use
(Default setting) An Intelligent Light Source is not being used.
F150-SLC20 An F150-SLC20 Intelligent Light Source is being
used.
F150-SLC50 An F150-SLC50 Intelligent Light Source is being
used.
Location of DIP switch F150-SLC20 F150-SLC50
Connect to
Camera 0 Connect to
Camera 1
Push up pin 1.
Connect to
Camera 0 Connect to
Camera 1
Move pin 1 to
the right.