Omron V530-R150E-3 -, Operation Manual

Page: 200 / 300

183
MON (Monitor) Mode
Section 6-2
6-2 MON (Monitor) Mode
Confirms whether the reading can be correctly performed with the set
conditions.
The reading judgment and data are not output to the terminal blocks
or RS-232C but displayed on a monitor.
Procedure
1,2,3...
1. Enter MON (Monitor) mode.
MON (monitor) mode is automatically moved to by leaving SET
mode using the ESC Key.
2. Input reading trigger.
• Console
One reading is performed when the TRIG Key is pressed
once.
• Terminal Block
“
page 35
• RS-232C
“
page 56, page 83
Note The light will become dimmer gradually as it is used, so adjust the
reading conditions periodically. If an Intelligent Light Source is
Reading Time
Reading Judgment
Displayed Images.
Press the SHIFT + Up/Down Keys to switch images.
Data obtained
NG will be displayed when reading
is not performed correctly or reading
data is not coincident with registered
data for coincidence judgments 0 to
3.