Omron V530-R150E-3 -, Operation Manual

Page: 87 / 300

70
Trigger Inputs and Output Format
Section 4-3
Note 1. The data is output in 3 digits.
2. The data is output in 4 digits.
3. The data is output in 6 digits.
4. The data is output in 5 digits.
Write System Data (@SW) 1:1 Connection
Writes the specified system data to the specified parameter.
Send
Set the desired parameter number (1 to 34) to and setting. Refer to
Read System Data (@SR) for a table showing details on the system
data settings.
“
page 68
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
35 3964(R) Character delay time 10 to 655350 in 10-ms units.
36 Acknowledge delay
time 10 to 655350 in 10-ms units.
37 Setup attribute count 1 to 255
38 Transfer attribute
count 1 to 255
39 Master/Slave 0: Master, 1: Slave
Number System data
@ S <Footer> W <Parameter no.> <Setting>
O K <Footer> <Header>
E R <Footer> <Header>