Omron V530-R150E-3 -, Operation Manual

Page: 276 / 300

259
Troubleshooting
Section 9-3
9-3 Troubleshooting
Connection Errors
The power indicator is not lit.
• The power supply is not connected properly.
• The supply voltage is not 24VDC+10%/–15%.
The monitor is blank.
• The power of the monitor is not ON.
• The monitor cable is not connected properly.
• The monitor is malfunctioning.
• The power supply is not sufficient for the LCD monitor (when the
LCD monitor is used).
Cannot make key inputs from the Console.
• The Console cable is not correctly connected.
Camera images are not displayed when using a Camera with a Light Source.
• The camera cable is not properly connected.
• The light source cable is not properly connected to the Camera.
Camera images are not displayed when using a standard CCTV lens and light
source.
• The lens cap has not been removed.
• The camera cable is not properly connected.
• The lens diaphragm is opened or closed too far.
• The shutter speed is not suitable.
• The lighting method is not suitable.
The LED light sources do not turn ON when using a Camera with a Light Source.
• The light source cable is not correctly connected to the Camera.
• Power is not being supplied to the V530-R150.
• When using an Intelligent Light Source:
The unit number is not set correctly on the Light Source’s DIP
switch.
If a Two-camera Unit is being used, set the unit number to 0 on
the Camera 0’s Light Source and set the unit number to 1 on the
Camera 1’s Light Source.
The images on the monitor are not clear.
• There is electrical noise entering from the power supply or
cables.
• The monitor cable is not correctly connected.