Omron V530-R150E-3 -, Operation Manual

Page: 272 / 300

255
Error Codes and Countermeasures
Section 9-2
9-2-2 Data Matrix Reading in Pattern Mode
Error Code Description Countermeasures
E160 Timing pattern detec-
tion error 1 (No finder
patterns were detected
for models 1 or 2) No timing pattern was detected.
• The timing pattern may be stained or damaged. Check
the condition of the timing pattern.
• The correlation value may be too high. Decrease the
correlation value.
• A model may not be registered. Confirm that a model is
registered.
• A model may have been registered with an incorrect
code size. Re-register the model.
E161 Timing pattern detec-
tion error 2 (32 or more
finder patterns were
detected for models 1
or 2) Too many timing patterns (32 or more) were detected.
• The correlation value may be too low. Increase the cor-
relation value.
E170 Finder pattern detec-
tion error 1 (No finder
pattern was detected
for model ABC) No finder pattern was detected.
• The finder pattern may be stained or damaged. Check
the condition of the finder pattern.
• The correlation threshold value may be too high.
Decrease the correlation value.
• A model may not be registered. Confirm that a model is
registered.
• A model may have been registered with an incorrect
Matrix size. Re-register the model.
• Model registration may not have been performed in the
optimum way. Re-register the model with reference to
page 152.
E171 Finder pattern detec-
tion error 2 (32 or more
finder patterns were
detected for model
ABC) Too many finder patterns (32 or more) were detected.
• The correlation threshold value may be too low.
Increase the correlation value.
• Model registration may not have been performed in the
optimum way. Re-register the model with reference to
page 152.
E172 Finder pattern detec-
tion error 3 (Relative
positioning is incorrect
for model ABC) 3 points of the finder pattern were detected.
However, the relative positioning of the patterns is incor-
rect.
• The finder pattern may be stained or damaged. Check
the condition of the finder pattern.
• The correlation threshold value may be too high.
Decrease the correlation value.
• Model registration may not have been performed in the
optimum way. Re-register the model with reference to
page 152.