Omron V530-R150E-3 -, Operation Manual

Page: 49 / 300

32
Specifications
Section 3-1
3-1 Specifications
3-1-1 Crimp Terminals and Cables
The terminal block uses M3 terminal screws. Use appropriate crimp
terminals for M3 screws, as shown below. Tighten the screws to a
torque of between 0.5 and 0.6 N•m. After wiring, check to make sure
that the wiring is correct.
!Caution
Cover the terminal blocks with the Terminal Block Protection Cov-
ers. Uncovered terminal blocks can result in electric shock.
Terminal Dimensions
3-1-2 Specifications
!Caution
Use a DC power supply with safe extra low-voltage circuits on the
secondary side.
Input Specifications
Terminal Maker Model No. Wire size
J.S.T. Mfg. Co., Ltd. V1.25-N3A 1.31 to
1.65 mm
2
J.S.T. Mfg. Co., Ltd. V1.25-MS3
Item V530-R150E-3 (NPN model) V530-R150EP-3 (PNP model)
Input voltage 12 to 24 VDC
–
10%
ON current 5 to 15 mA
ON voltage 8.8 V max.
OFF current 0.1 mA max.
OFF voltage 4.5 V min.
ON delay RESET input: 10 ms max.
Others: 0.5 ms max.
OFF delay RESET input: 15 ms max.
Others: 0.7 ms max.
Internal circuits
Forked
6.2 mm max.
Round
6.2 mm max.
Input
terminal
COM IN
Input
terminal
COM IN