Omron V530-R150E-3 -, Operation Manual

Page: 218 / 300

201
System
Section 6-4
Note If polling is turned ON, RS-232C and terminal block data
(DO0 to DO3) will not be output until the polling command
is received.
5. Select whether or not to output just a part of the Reading Data.
Select OFF or ON. (Default setting: OFF)
6. When the Limit Data Function is set to ON, specify the start point
(digit 1 to 999). The start point does not include the data specified
in steps 1, 2, and 3.
(Default setting: 1)
7. When the Limit Data Function is set to ON, specify the end point
(digit 1 to 999). The end point does not include the data specified
in steps 1, 2, and 3.
(Default setting: 999)
Procedures for RS232C, Normal, Host Link, Terminal Block, and
Data Output Settings
1,2,3...
1. Select Communications.
2. Select RS-232C, Normal, Host link, Terminal block, or Data
Output Settings.
Example:
Start point: 5 End point: 8
0 3 0 . . . 2 0 0 1 0 3 2 6 - A . . .
.