Omron V530-R150E-3 -, Operation Manual

Page: 230 / 300

213
Computer Data Backup (Tool Menu)
Section 6-5
6-5 Computer Data Backup (Tool Menu)
The following four kinds of setting data can be backed up to a per-
sonal computer. This is a useful function for setting other devices with
the same data. Backing up the setting data is recommended as a
precaution against loss due to data damage or device malfunctions.
Note Never input the reset signal or turn OFF the power while saving or
loading. Data may be lost, and the V530-R150 may not operate
properly the next time it is started.
Operation Examples for Personal Computers
This section describes data transfer using the Hyper Terminal pro-
vided on Windows 98 and Windows NT4.0 computers. In this exam-
ple, a RS-232C cable is connected to the COM1 port of the computer.
Alter the example to suit your communications software or COM port
number.
Data transfer is performed with XMODEM (-CRC or -SUM) protocol
method. The XMODEM(-1K) protocol is not supported.
Note Never input the reset signal or turn OFF the power when process-
ing messages for saving or loading operations are displayed.
Data Contents
System data Back up all of the system settings to a personal computer.
Scene data Back up the items set in SET mode for each scene to a personal com-
puter.
scene data Back up system data and scene data 0 to 9 to a personal computer.
Image data Back up stored images to a personal computer in the BMP format
(*.BMP).The images can be displayed on most personal computers as
BMP is a standard image format for Windows.
•
Saving
•
Loading
Personal Computer
Data
Data
Personal Computer