Omron V530-R150E-3 -, Operation Manual

Page: 77 / 300

60
Trigger Inputs and Output Format
Section 4-3
Continuous Reading (@GC, @SC) 1:1 Connection
Performs continuous reading until the stop command (@SC) is sent.
Send
Starts reading.
Receive Refer to the explanation of the output format.
“
page 82
Send
Stops continuous reading.
QR Code Teaching (@TQ) 1:1 Connection
Performs teaching in QR Code (normal) mode. If the reading judge-
ment is OK, the optimum settings will be registered automatically. If
the reading judgement is NG, the settings will not be updated.
Perform teaching on a freeze image.
Send
Set the symbol color to either B or W. (B specifies black and W spec-
ifies white.)
Receive Refer to the explanation of the output format.
“
page 82
Note The timeout time is fixed at 10 s when teaching. A timeout error
will be output if the reading judgement is NG. In this case, check
the code conditions and execute the @TQ command again.
Data Matrix Teaching (@TD) 1:1 Connection
Performs teaching in Data Matrix (normal) mode. If the reading judge-
ment is OK, the optimum settings will be registered automatically. If
the reading judgement is NG, the settings will not be updated. Auto-
matically discriminates between EC200 and EC000 to EC140 based
on the matrix size.
Perform teaching on a freeze image.
Send
@ G C <Footer>
@ S C <Footer>
@ T <Footer> Q <Symbol color>
@ T <Footer> D <Matrix size>