Omron OMNUC W Series, User Manual

Page: 398 / 408

6-18
Para-
meter
No.
Restart
power?
Setting
range
Unit Default
setting
400 V
Default
setting
100/200 V
Explanation (See note 1.) Parameter
name
Para-
meter
No.
Restart
power?
Setting
range
Unit Default
setting
400 V
Default
setting
100/200 V
Explanation (See note 2.) Set-
ting
Name
Digit
No.
Parameter
name
Pn50A Input
signal
selection 1
0 Input
signal
allocation
d
0 Sets the sequence input
signal allocation to the same
as R88D-UT.
8100 2100 --- --- Yes
mode
1 User-defined sequence
input signal allocation
1 RUN
signal
(RUN
0 Allocated to CN1, pin 40:
Valid for low output. g
(RUN
comman
d) input
1 Allocated to CN1, pin 41:
Valid for low output
d) input
terminal
allocation
2 Allocated to CN1, pin 42:
Valid for low output
3 Allocated to CN1, pin 43:
Valid for low output
4 Allocated to CN1, pin 44:
Valid for low output
5 Allocated to CN1, pin 45:
Valid for low output
6 Allocated to CN1, pin 46:
Valid for low output
7 Always enabled.
8 Always disabled.
9 Allocated to CN1, pin 40:
Valid for high output
A Allocated to CN1, pin 41:
Valid for high output
b Allocated to CN1, pin 42:
Valid for high output
C Allocated to CN1, pin 43:
Valid for high output
d Allocated to CN1, pin 44:
Valid for high output
E Allocated to CN1, pin 45:
Valid for high output
F Allocated to CN1, pin 46:
Valid for high output
2 MING
signal
input
terminal
allocation
0 to
F
Same as Pn50A.1.
MING (gain reduction)
signal allocation
3 POT
signal
Input
terminal
allocation
0 to
F
Same as Pn50A.1
POT (forward drive
prohibited) signal allocation
Appendix Chapter 6
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr