4-39
Pn50F.1
Output signal selection 2 --- VLIMT signal (speed limit detection) output terminal allocation
(Torque)
Setting
range
0 to 3
Unit
---
Default
setting
0
Restart
power?
Yes
Pn50F.2
Output signal selection 2 --- BKIR signal (brake interlock) output terminal signal (All operation
modes)
Setting
range
0 to 3
Unit
---
Default
setting
0
Restart
power?
Yes
Pn50F.3
Output signal selection 2 --- WARN signal (warning) output terminal allocation (All operation
modes)
Setting
range
0 to 3
Unit
---
Default
setting
0
Restart
power?
Yes
Pn510.0
Output signal selection 3 --- INP2 (positioning completed 2) output terminal allocation
(Position)
Setting
range
0 to 3
Unit
---
Default
setting
0
Restart
power?
Yes
•
Parameter settings are the same as for Pn50E.0.
•
The WARN (alarm output) signal is normally ON, and turns OFF when an alarm occurs.
Pn512.0
Output signal reverse --- Pins CN1-25 and 26 output signal reverse (All operation modes)
Setting
range
0, 1
Unit
---
Default
setting
0
Restart
power?
Yes
Setting Explanation
Setting
Explanation
0
Not reversed.
1
Reversed.
•
Select the characteristics of the output signal allocated to pins CN1-25 and 26.
•
If you set 1 (reverse), ON/OFF outputs are reversed.
Pn512.1
Output signal reverse-Pins CN1-27 and 28 output signal reverse (All operation modes)
Setting
range
0, 1
Unit
---
Default
setting
0
Restart
power?
Yes
Setting Explanation
Setting
Explanation
0
Not reversed.
1
Reversed.
Pn512.2
Output signal reverse --- Pins CN1-29 and 30 output signal reverse (All operation modes)
Setting
range
0, 1
Unit
---
Default
setting
0
Restart
power?
Yes
Setting Explanation
Setting
Explanation
0
Not reversed.
1
Reversed.
Operation
Chapter 4
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]