Omron OMNUC W Series, User Manual

Page: 397 / 408

6-17
Para-
meter
No.
Restart
power?
Setting
range
Unit Default
setting
400 V
Default
setting
100/200 V
Explanation (See note 1.) Parameter
name
Para-
meter
No.
Restart
power?
Setting
range
Unit Default
setting
400 V
Default
setting
100/200 V
Explanation (See note 2.) Set-
ting
Name
Digit
No.
Parameter
name
Pn502 Rotation
speed for
motor
rotation
detection
Sets the number of rotations for the Servomotor
rotation detection output (TGON).
20 20 r/min 1 to
10000
---
Pn503 Speed
conformity
signal
output
width
Sets the allowable fluctuation (number of rotations) for
the speed conformity output (VCMP).
10 10 r/min 0 to 100 ---
Pn504 Positioning
completion
range 2
Sets the range for positioning completed output 2
(INP2).
3 7 Command
unit
1 to 250 ---
Pn505 Deviation
counter
overflow
level
Sets the detection level for the deviation counter over
alarm.
1024 1024 x 256
command
unit
1 to
32767
---
Pn506 Brake
timing 1
Sets the delay from the brake command to the
Servomotor turning OFF.
0 0 x 10 ms 0 to 50 ---
Pn507 Brake
command
speed
Sets the spread for outputting the brake command. 100 100 r/min 0 to
10000
---
Pn508 Brake
timing 2
Sets the delay time from the Servomotor turning OFF
to the brake command output.
50 50 x 10 ms 10 to
100
---
Pn509 Momentary
hold time
Sets the time during which alarm detection is disabled
when a power failure occurs.
20 20 ms 20 to
1000
---
Appendix Chapter 6
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr