Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SafeTy
WaRNING!
Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective
Equipment is available from your Sealey dealer.
WaRNING!
Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when
using tools.
8
DO NOT
use tools if damaged.
9
Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9
Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
8
DO NOT
attempt to start or move a vehicle whilst in gear and with timing devices fitted.
9
Wear suitable clothing to avoid snagging.
DO NOT
wear jewellery. Tie back long hair.
9
Account for all tools, parts and components being used.
DO NOT
leave these in or near the engine. Return tools to suitable storage
after use.
9
When not in use, store in a safe, dry childproof place.
9
Keep children and unauthorised persons away from the work area.
▲
IMPORTaNT! These instructions are provided as a guide only. always refer to the vehicle manufacturer’s service
instructions or a proprietary manual to establish the correct procedure and data.
WaRNING!
The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator /
user must apply caution and common sense (good practical sense).
9
When timing an engine, always prevent the engine from being turned over. Use a notice and / or inhibit the engine.
WaRNING!
Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. This will cause
damage to the engine.
2. INTRODucTION
Provides the specialised tools required for timing belt replacement on both the first and second generation of “EW Code” 1.8, 2.0 and 2.2 PSA
twin camshaft 16v engines, including HPi versions, fitted to Citroën and Peugeot models. Supplied with warning tag.
In addition, Pulley Flange Repositioning Tool VS1212, may be required on certain engines for final timing adjustment via the crankshaft pulley flange.
3. cONTeNTS
Item
Part no.
Description
1
VS1211/P10
Camshaft locking pins (pair)
2
VS1211/P11
Crankshaft locking pin
3
VS1211/P12
Flywheel holding tool
4
VS1211/P13
Tensioner setting pin
5
VS1211/P14
Camshaft locking pin (HPi)
6
VS4735/P15
Camshaft locking pins (2 in kit)
7
VS1210/04
Belt retaining kit
8
VS4825/P19
Flywheel locking pin
--
VS4826
Set (comprising parts 9 and 10)
9
VS4826/1
Tensioner turning tool
10
VS4826/2
Tensioner locking tool
associated Tool required
VS1212
C
rank flange pulley repositioning tool
Wear eye
protection
Refer to
instruction
manual
VS4825 | Issue 2(SP) 03/07/15
Original Language Version
© Jack Sealey Limited
InSTRUCTIonS FoR
PeTROl eNGINe SeTTING/lOckING TOOl kIT -
cITROeN, PeuGeOT 1.8, 2.0, 2.2 - belT DRIve
ModEL no:
vS4825
