472
Temperature Input Unit Functions
Section 11-5
3.
The comparison result will be read to a precision of 0.01, regardless of the
setting.
Setting Using CX-Integrator
1,2,3...
1.
Turn ON the power supply to the Temperature Input Unit.
2.
Double-click the icon of the Temperature Input Unit to be set in the Network
Configuration Window or right-click the icon and select
Parameter - Edit
.
The Configuration Window will be displayed.
3.
Click the
Data Comparison Between Channels
Tab.
4.
Double-click the
Calculation Data1
or
Calculation Data2
cell to open the
Edit Calculation Data Window.
5.
Select the two temperature inputs to be compared in the
Calculation Data1
and
Calculation Data2
Fields. Set a monitor value in the Monitor Value
Field. Always set the threshold value to two decimal places. For example,
when setting 10
°
C, input 1000 for 10.00
°
C.
540
°
C
580
°
C?
543
°
C
538
°
C
The temperature difference
with device B is much higher
than the other devices.
Is it an error?
Device A
Device B
Device C
Device D
Compare
Compare
Compare
Temperature
Input Terminal
Detect temperature differences
with each input.
Summary of Contents for CRT1 - 10-2008
