Omron CRT1 - 10-2008, Operation Manual

Page: 582 / 584

559
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date Revised content
01 September 2006 Original production
02 July 2007 Additions to include Digital I/O Slave Units (16-point Input Unit with 3-tier terminal
block, 16-point Output Unit with 3-tier terminal block, 8-point Input/8-point Output
Unit with 3-tier terminal block, and 16-point Output Unit with relay outputs).
Connector names were also changed globally.
03 October 2007 Information was added on the following.
Digital I/O Slave Units:
16-input Units (Connector Model and Clamp Model),
16-output Unit (2-tier Terminal Block Model with SSR Outputs, Connector Model,
and Clamp Model)
8-input and 8-output Units (Connector Model)
04 May 2008 Added information on the following Digital I/O Slaves 8-point Input Units (with 2-tier
terminal block, with 3-tier terminal block, with e-CON connector, or with screwless
clamp terminals), 8-point Output Units (with 2-tier terminal block, with 2-tier terminal
block and relay outputs, with 2-tier terminal block and SSR outputs, with 3-tier termi-
nal block, with e-CON connector, or with screwless clamp terminals), 8-point Input/8-
point Output Units (with 2-tier terminal block, with 3-tier terminal block and detection
function, with e-CON connector and detection function, or with screwless clamp ter-
minals), 16-point Input Units (with 3-tier terminal block and detection function, with e-
CON connector and detection function, or with MIL connector), 16-point Output
Units (with 3-tier terminal block and detection function, with e-CON connector and
detection function, or with MIL connector), 32-point Input Units (with e-CON connec-
tor or with MIL connector), 32-point Output Unit (with e-CON connector or with MIL
connector), and 16-point Input/16-point Output Units (with e-CON connectors or with
MIL connector).
05 October 2008 Added information on Temperature Input Units (4 inputs).
Cat. No. W457-E1-05
Revision code