Omron CRT1 - 10-2008, Operation Manual

Page: 488 / 584

465
Temperature Input Unit Functions Section 11-5
4. Click the Rate of Change Tab and input the desired value for the sampling
cycle.
5. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
6. Click the OK Button and exit the window.
11-5-7 Comparator
When the High High Limit, High Limit, Low Low Limit, and Low Limit are set in
the Unit, a status flag will be turned ON when a value exceeds the set range.
The four set values are High High Limit (HH), High Limit (H), Low Low Limit
(LL), and Low Limit (L). The values are compared with those in Temperature
Data 1. (The comparator function cannot be used with Temperature Data 2.)
The setting range is
−
415,000 to 415,000.
When any of these values is exceeded, the Comparator Result Flag in the
area for Temperature Status Flags is turned ON. If an alarm has not occurred,
the Normal Flag (pass signal) will be ON.