328
Overview of Temperature Input Units
Section 7-2
1/100 Display Mode (9 Word (18 Bytes))
Hold Flags (Output)
The Hold Flags are used with the peak/bottom hold and top/valley hold func-
tions. They are used to control the hold execution timing from the Master Unit.
They are allocated in the Master Unit using the following data format (1 word
(2 bytes)).
Note
A transmission delay may occur between when the Master Unit's power is
turned ON and the status of the Hold Flag is transferred to the Temperature
Input Unit.
Each bit is described in the following table.
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
+0
+1
Temperature Data 1 for Input 0, Lower Word
+2
+3
Temperature Data 1 for Input 0, Upper Word
+4
+5
Temperature Data 1 for Input 1, Lower Word
+6
+7
Temperature Data 1 for Input 1, Upper Word
+8
+9
Temperature Data 1 for Input 2, Lower Word
+10
+11
Temperature Data 1 for Input 2, Upper Word
+12
+13
Temperature Data 1 for Input 3, Lower Word
+14
+15
Temperature Data 1 for Input 3, Upper Word
+16
0
0
0
0
V_ST3
V_ST2
V_ST1
V_ST0
+17
0
0
0
0
T_ST3
T_ST2
T_ST1
T_ST0
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
+0
0
0
0
0
HD3
HD2
HD1
HD0
+1
0
0
0
0
0
0
0
0
Bit
Abbreviation
Name
Description
0
HD0
Hold Flag for
Input 0
The hold function is performed for Tem-
perature Input 0 while this flag is ON.
The hold function stops and the last
value is held when the flag goes OFF.
1
HD1
Hold Flag for
Input 1
The hold function is performed for Tem-
perature Input 1 while this flag is ON.
The hold function stops and the last
value is held when the flag goes OFF.
2
HD2
Hold Flag for
Input 2
The hold function is performed for Tem-
perature Input 2 while this flag is ON.
The hold function stops and the last
value is held when the flag goes OFF.
3
HD3
Hold Flag for
Input 3
The hold function is performed for Tem-
perature Input 3 while this flag is ON.
The hold function stops and the last
value is held when the flag goes OFF.
Summary of Contents for CRT1 - 10-2008
