Omron CRT1 - 10-2008, Operation Manual

Page: 111 / 584

88
Connecting External I/O for Slave Units Section 3-6
3-6 Connecting External I/O for Slave Units
This section describes how to connect external devices, such as sensors, to
the I/O terminals of Slave Units. The connection method varies depending on
the type of Slave Unit that is used. The following table shows the differences
in external I/O connection methods according to the Slave Unit.
Name Model I/O connection method
Digital I/O Slave
Units With 2-tier Terminal Block CRT1-ID08(-1) Screw terminal block
(M3)
CRT1-OD08(-1)
CRT1-ID16(-1)
CRT1-OD16(-1)
CRT1-MD16(-1)
CRT1-ROS08
CRT1-ROF08
CRT1-ROS16
CRT1-ROF16
With 3-tier Terminal Block CRT1-ID08TA(-1)
CRT1-OD08TA(-1)
CRT1-ID08TAH(-1)
CRT1-OD08TAH(-1)
CRT1-ID16TA(-1)
CRT1-OD16TA(-1)
CRT1-MD16TA(-1)
CRT1-ID16TAH(-1)
CRT1-OD16TAH(-1)
CRT1-MD16TAH(-1)
With e-CON Connectors CRT1-VID08S(-1) e-CON connector
CRT1-VOD08S(-1)
CRT1-ID16S(-1)
CRT1-OD16S(-1)
CRT1-MD16S(-1)
CRT1-ID16SH(-1)
CRT1-OD16SH(-1)
CRT1-MD16SH(-1)
CRT1-ID32S(-1)
CRT1-OD32S(-1)
CRT1-MD32S(-1)
CRT1-ID32SH(-1)
CRT1-OD32SH(-1)
CRT1-MD32SH(-1)
With MIL Connectors CRT1-VID16ML(-1) MIL connector
CRT1-VOD16ML(-1)
CRT1-VID32ML(-1)
CRT1-VID32ML(-1)
CRT1-VMD32ML(-1)
With Screw-less Clamp Terminal
Blocks CRT1-ID08SL(-1) Screw-less clamp termi-
nal block
CRT1-OD08SL(-1)
CRT1-ID16SL(-1)
CRT1-OD16SL(-1)
CRT1-MD16SL(-1)