Omron CRT1 - 10-2008, Operation Manual

Page: 32 / 584

9
Features of CompoNet Slave Units Section 1-1
Yes: Supported,
---
: Not supported
Note The Contact Operation Monitor and the Total ON Time Monitor cannot be
used at the same time for the same contact.
Unit Digital I/O Slave Units
3-tier Terminal block
CRT1- @D 08TA(-1)
(without Short-circuit and
Disconnected Line Detection)
CRT1- @D 08TAH(-1)
(with Short-circuit and
Disconnected Line Detection)
Function Input Units Output Units Input Units Output Units
Operation Time Monitor Yes
Contact Operation Monitor Yes
Total ON Time Monitor Yes
Automatic Baud Rate Detection Yes
Unit Conduction Time Monitor Yes
Naming Units Yes
Naming Connected Devices Yes
Network Power Voltage Monitor Yes
I/O Power Status Monitor Yes
Communications Error History Monitor Yes
Input Filter Yes --- Yes ---
Communications Error Output --- Yes --- Yes
Preventing Malfunctions Caused by
Inrush Current at I/O Startup Yes --- Yes ---
Power Short-circuit Detection --- Yes ---
Unconnected Line Detection --- Yes ---
Load Short-circuit Detection --- --- Yes
Disconnected Line Detection --- --- Yes
Removable Terminal Block Structure Yes
Expansion Using Expansion Units ---
Scaling ---
Last Maintenance Date Yes
Cumulative Counter ---
Moving Average ---
Setting the Number of AD Conversion
Points ---
Rate of Change ---
Comparator ---
Peak/Bottom Hold ---
Top/Valley Hold ---
User Adjustment ---
Top/Valley Count ---
Temperature Range Total Time Count ---
Input Temperature Variation Detection ---
Input Error Detection Disable Function ---