xxii
Conformance to EC Directives
6
• Touch a grounded piece of metal to discharge static electricity from your
body before touching any Unit.
• When replacing relays or other parts, be sure to confirm that the ratings of
the new part are correct. Not doing so may result in malfunction or burn-
ing.
• Do not attempt to disassemble, repair, or modify any Units. Any attempt to
do so may result in malfunction, fire, or electric shock.
• On IP54 Bit Slaves, tighten the cover screws to the specified torque after
setting the rotary switches or performing wiring. The specified degree of
protection will not be achieved if the screws are not tightened sufficiently.
• Take appropriate and sufficient countermeasures when installing systems
in the following locations:
• Locations subject to static electricity or other forms of noise.
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
6
Conformance to EC Directives
6-1
Applicable Directives
• EMC Directives
• Low Voltage Directive
6-2
Concepts
EMC Directives
The OMRON products described in this manual are designed so that they
individually comply with the related EMC Directives so that they can be more
easily built into other devices or the overall machine. The actual products have
been checked for conformity to EMC Directives (see note). Whether the prod-
ucts conform to the standards in the system used by the customer, however,
cannot be checked by OMRON and must be checked by the customer.
EMC-related performance of the OMRON devices that comply with EC Direc-
tives will vary depending on the configuration, wiring, and other conditions of
the equipment or control panel on which the OMRON devices are installed.
The customer must, therefore, perform the final check to confirm that devices
and the overall machine conform to EMC standards.
Note
Applicable EMC (Electromagnetic Compatibility) standards are as follows:
EMS (Electromagnetic Susceptibility):
EN 61131-2 and EN 61000-6-2
EMI (Electromagnetic Interference):
EN 61131-2 and EN 61000-6-4
(Radiated emission: 10-m regulations)
Summary of Contents for CRT1 - 10-2008
