Omron CRT1 - 10-2008, Operation Manual

Page: 407 / 584

384
Clamp Terminal Blocks Section 9-4
9-4 Clamp Terminal Blocks
9-4-1 Two-point Input/Two-point Output Units (IP54)
CRT1B-MD04SLP/CRT1B-MD04SLP-1
Input Section Specifications
Note The current consumption is for Bit Slave Unit communications cur-
rent when all inputs and outputs are OFF, i.e., it does not include
input device current consumption or output load current consump-
tion. The communications power supply is also used for the I/O
power supply for sensors and actuators. Be sure to consider the
sensor and actuator current consumption and the number of sen-
sors and actuators connected. The power supply current consump-
tion is expressed by the following formula.
Communications power supply current consumption = Bit Slave
Unit communications current consu (Bit Slave Unit input
current
×
number of inputs used) + (sensor current consumption
×
number of sensors used) + (actual load current x number of actua-
tors used)
Item Specification
Model CRT1B-MD04SLP CRT1B-MD04SLP-1
I/O capacity 2 inputs
Internal I/O common line NPN PNP
ON voltage 10.5 VDC min. (between each input
terminal and the V terminal) 10.5 VDC min. (between each input
terminal and the G terminal)
OFF voltage 5 VDC max. (between each input
terminal and the V terminal) 5 VDC max. (between each input
terminal and the G terminal)
OFF current 1 mA max.
Input current 3.0 mA min./input (at 10.5 VDC)
Sensor power supply voltage Communications power supply voltage 0 V (max.)
Communications power supply voltage
−
1 V (min.)
ON delay 1.5 ms max.
OFF delay 1.5 ms max.
Number of circuits per common 2 inputs/common
Power short-circuit detection Supported.
Isolation method No isolation
Input indicators LEDs (yellow)
Degree of protection IEC standard IP54
Installation Screw installation (M4)
Power supply type Network power supply
Communications power supply
current consumption (See note.) 80 mA max. for 24-VDC power sup-
ply voltage
90 mA max. for 14-VDC power sup-
ply voltage
75 mA max. for 24-VDC power sup-
ply voltage
85 mA max. for 14-VDC power sup-
ply voltage
Weight 191 g max. 191 g max.