Omron CRT1 - 10-2008, Operation Manual

Page: 39 / 584

16
Features of CompoNet Slave Units Section 1-1
Yes: Supported,
---
: Not supported
Note The Contact Operation Monitor and the Total ON Time Monitor cannot be
used at the same time for the same contact.
Unit Analog l I/O Slave Units Temperature Input Units
CRT1-AD04
CRT1-DA02
CRT1-TS04T
CRT1-TS04P
Function Input Units Output Units Input Units
Operation Time Monitor --- ---
Contact Operation Monitor --- ---
Total ON Time Monitor --- ---
Automatic Baud Rate Detection Yes Yes
Unit Conduction Time Monitor Yes Yes
Naming Units Yes Yes
Naming Connected Devices Yes Yes
Network Power Voltage Monitor Yes Yes
I/O Power Status Monitor --- ---
Communications Error History Monitor Yes Yes
Input Filter --- ---
Communications Error Output --- Yes ---
Preventing Malfunctions Caused by Inrush
Current at I/O Startup --- ---
Power Short-circuit Detection --- ---
Unconnected Line Detection --- ---
Load Short-circuit Detection --- ---
Disconnected Line Detection Yes --- Yes
Removable Terminal Block Structure Yes Yes
Expansion Using Expansion Units --- ---
Scaling Yes Yes
Last Maintenance Date Yes Yes
Cumulative Counter Yes Yes
Moving Average Yes --- Yes
Setting the Number of AD Conversion Points Yes --- ---
Rate of Change Yes --- Yes
Comparator Yes --- Yes
Peak/Bottom Hold Yes --- Yes
Top/Valley Hold Yes --- Yes
User Adjustment Yes Yes
Top/Valley Count --- Yes
Temperature Range Total Time Count --- Yes
Input Temperature Variation Detection --- Yes
Input Error Detection Disable Function --- Yes